Stainless Steel Diamond/checkered Plate:
Stainless Steel Diamond Plate is embossed on the stainless steel plate by mechanical equipment, so that the surface of the plate has uneven patterns. In the early 1960s, large-scale steel rolling mills in Europe began small-scale production. Later, due to the excellent corrosion resistance and anti-slip properties of stainless steel checkered plates, they were adopted by many industries and began to spread. The pattern of the earliest stainless steel checkered plate is horizontal and vertical stripes staggered, both domestic Taishan Steel and Shanghai Baosteel Group are producing. In the following 20-30 years, researchers have continued to experiment and improve the The pattern design is also promoted and applied on a large scale. In recent years, the use of stainless steel checkered plates has also been continuously innovated, broken through, and changed. The applicable industries and product models are also increasing, and the speed of product replacement is more frequent.
Production process:
The stainless steel pattern plate is divided into two categories:
The first type is produced by a steel mill through rolling mills when producing stainless steel. The main thickness of this type of product is about 3-6mm, which is the state of annealing and pickling after hot rolling. The process is as follows:
Stainless steel billet→Rolling black coil by hot continuous rolling mill→Thermal annealing and pickling line→Smoothing machine, tension leveler, polishing line→Cross cutting line→Hot rolled stainless steel checkered plate
This type of pattern plate is flat on one side and the pattern on the other side. This type of pattern board is more commonly used in chemical industry, railway vehicles, platforms and other occasions that require strength. Such products are mainly imported, usually from Japan and Belgium, and domestic Taigang and Baosteel are of this type.
The second category is the processing enterprises on the market, buying hot-rolled or cold-rolled stainless steel plates in steel mills, and patterned plates made by mechanical stamping. These products are concave and convex on one side, and are often used in general civil decoration occasions. This type of product has more cold rolling, and most of the 2B/BA cold rolled stainless steel checkered plates on the market are of this type.
General specifications:
5WL/6WL/2WL/Linen/square/diamond/concave diamond/convex diamond/tile/tile/ripple.......
International innovation trends:
With more and more scientific research investment and research and development, the use of stainless steel checkered plates is no longer limited to the professional fields and industrial application areas of anti-slip and anti-corrosion. Transportation, machinery manufacturing and other industries, and derived from checkered, diamond, leather, ceramic tiles, stone bricks, ripples and other products of more than 20 international specifications. Based on the above products, new products such as coloring, coating, compounding, nano sealing film, super anti-corrosion, anti-bacterial, anti-wear stainless steel pattern plate are also constantly meeting the needs of human high-quality life and industry innovation.
The ultra-smooth anti-sticking self-hidden scratch stainless steel pattern board first entered China in August 2010. The main innovative models are: 2, 3, 5, 6, WL series, the origin is in the United Kingdom, Sweden, the United States, the surface of the above stainless steel sheet Point-like protrusions, which are 30-40% higher than the slide efficiency of ordinary stainless steel plates, especially 3WL series NANO and SUPER are 40-60% higher than ordinary plates. This new type of stainless steel pattern plate has plagued the domestic machinery and equipment industry for many years. The problem of inefficient road is solved perfectly.
Stainless Steel Checker Sheet | ||||||||
Product: | Stainless Steel Checker Sheet | |||||||
Material: | Stainless Steel 200 series,300series,400series | |||||||
Standard: | ASTM/DIN/GB/JIS/AISI | |||||||
Dimension: | Thickness:0.25-50mm,Width:1000mm,1219mm,1500mm,1800mm | |||||||
Length: | 2000mm,2438mm,3000mm,6000,Random Length | |||||||
Surface Finish: | No.1/2B/No.4/4K/6K/8K/HL/Brushed | |||||||
Tchnology: | Cold Rolled ,Hot Rolled | |||||||
MOQ: | 1TON | |||||||
Package: | Standard Export Packing,Or As Per Your Requirement | |||||||
Application: | Railings,Staircase Railing Balustrade,Windows,Balustrsde System,Equipment Manufacturing and Maintenance,etc. |
Mechanical Property | |||||
ASTM | TS(Mpa)≥ | YS(Mpa)≥ | EL(%)≥ | Hardness | |
HB | HRB | ||||
201 | 520 | 275 | 40 | 241 | 100 |
202 | 520 | 275 | 40 | 207 | 95 |
301 | 520 | 205 | 40 | 207 | 95 |
304 | 520 | 205 | 40 | 20 | 90 |
304L | 480 | 175 | 40 | 187 | 90 |
309S | 520 | 205 | 40 | 187 | 90 |
310 | 520 | 205 | 40 | 187 | 90 |
310S | 520 | 205 | 40 | 187 | 90 |
316 | 520 | 205 | 40 | 187 | 90 |
316L | 480 | 175 | 40 | 187 | 90 |
316Ti | 520 | 205 | 40 | 187 | 90 |
317L | 480 | 175 | 40 | 187 | 90 |
321 | 520 | 205 | 40 | 187 | 90 |
430 | 450 | 205 | 22 | 183 | 88 |
904L | 490 | 216 | 35 | ||
2205 | 640 | 25 |
Chemical Composition | ||||||||||||
Chemical Composition(%) | ||||||||||||
C | Si | Mn | P | S | Ni | Cr | Mo | Cu | N | Other | ||
1Cr17Mn6Mi5N | 201 | 0.15 | 1.00 | 5.5-5.7 | 0.06 | 0.03 | 3.3-3.5 | 16-18 | _ | _ | 0.05-0.25 | |
1Cr18Mn8Mi5N | 202 | 0.15 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.0-6.0 | 17-19 | _ | _ | 0.05-0.25 | |
1Cr18Mn8Mi5N | 301 | 0.15 | 1.00 | 2.00 | 0.07 | 0.03 | 6.0-8.0 | 16-18 | _ | _ | 0.10 | |
0Cr18Ni9 | 304 | 0.07 | 1.00 | 2.00 | 0.035 | 0.03 | 8.1-10.0 | 17-19 | _ | _ | _ | |
0Cr18Ni9 | 309S | 0.08 | 1.00 | 2.00 | 0.035 | 0.03 | 12.0-15.0 | 22-24 | _ | _ | _ | |
0Cr25Ni20 | 310S | 0.08 | 1.00 | 2.00 | 0.035 | 0.03 | 19.0-22.0 | 24-26 | _ | _ | _ | |
0Cr17Ni12Mo2 | 316 | 0.08 | 1.00 | 2.00 | 0.035 | 0.03 | 10.0-14.0 | 16-18.5 | 2.0-3.0 | _ | _ | |
00Cr17Ni14Mo2 | 316L | 0.08 | 1.00 | 2.00 | 0.035 | 0.03 | 12.0-15.0 | 16-18 | 2.0-3.0 | _ | _ | |
0Cr18Ni12Mo3Ti | 316Ti | 0.08 | 1.00 | 2.00 | 0.035 | 0.03 | 11.0-14.0 | 16-19 | 2.5-3.5 | _ | _ | Ti≥5C |
0Cr18Ni12Mo3Ti | 317L | 0.03 | 1.00 | 2.00 | 0.035 | 0.03 | 11.0-15.0 | 18-20 | 3.0-4.0 | _ | _ | |
1Cr18Ni9Ti | 321 | 0.12 | 1.00 | 2.00 | 0.035 | 0.03 | 8.0-11.0 | 17-19 | _ | _ | _ | Ti5C-0.70 |
1Cr12 | 430 | 0.12 | 1.00 | 2.00 | 0.035 | 0.03 | 0.60 | 16-18 | _ | _ | _ | |
00Cr20Ni25Mo4.5Cu | 904L | 0.02 | 1.00 | 2.00 | 0.035 | 0.03 | 23.0-28.0 | 19-23 | 4.0-5.0 | 1.0-2.0 | 0.14-0.20 | |
00Cr2Ni5Mo3N | 2205 | 0.03 | 1.00 | 2.00 | 0.035 | 0.02 | 4.5-6.5 | 21-23 | 2.5-3.5 | _ | _ |
Stainless steel national standard _ stainless steel implementation standard _ national stainless steel grade comparison table | ||||||||||
No | China GB | Japan | United States | Korea | EU | India | Australia | Taiwan, China | ||
Old grade | New grade(07.10) | JIS | ASTM | UNS | KS | BS EN | IS | IS | CNS | |
Austenitic stainless steel | ||||||||||
1 | lCrl7Mn6Ni5N | 12Crl7Mn6Ni5N | SUS201 | 201 | S20100 | STS201 | 1.4372 | 10Crl7Mn6Ni4N20 | 201-2 | 201 |
2 | lCrl8Mn8NI5N | 12Crl8Mn9Ni5N | SUS202 | 202 | S20200 | STS202 | 1.4373 |
| - | 202 |
3 | lCrl7Ni7 | 12Crl7Ni7 | SUS301 | 301 | S30100 | STS301 | 1.4319 | 10Crl7Ni7 | 301 | 301 |
4 | 0Crl8Ni9 | 06Crl9Nil0 | SUS304 | 304 | S30400 | STS304 | 1.4301 | 07Crl8Ni9 | 304 | 304 |
5 | 00Crl9Nil0 | 022Crl9Nil0 | SUS304L | 304L | S30403 | STS304L | 1.4306 | 02Crl8Nill | 304L | 304L |
6 | 0Crl9Ni9N | 06Crl9Nil0N | SUS304N1 | 304N | S30451 | STS304N1 | 1.4315 | - | 304N1 | 304N1 |
7 | 0Crl9Nil0NbN | 06Crl9Ni9NbN | SUS304N2 | XM21 | S30452 | STS304N2 | - | - | 304N2 | 304N2 |
8 | 00Crl8Nil0N | 022Crl9Nil0N | SUS304LN | 304LN | S30453 | STS304LN | - | - | 304LN | 304LN |
9 | lCrl8Nil2 | 10Crl8Nil2 | SUS305 | 305 | S30500 | STS305 | 1.4303 | - | 305 | 305 |
10 | 0Cr23Nil3 | 06Cr23Nil3 | SUS309S | 309S | S30908 | STS309S | 1.4833 | - | 309S | 309S |
11 | 0Cr25Ni20 | 06Cr25Ni20 | SUS310S | 310S | S31008 | STS310S | 1.4845 | - | 310S | 310S |
12 | 0Crl7Nil2Mo2 | 06Crl7Nil2Mo2 | SUS316 | 316 | S31600 | STS316 | 1.4401 | 04Crl7Nil2Mo2 | 316 | 316 |
13 | 0Crl8Nil2Mo3Ti | 06Crl7Nil2Mo2Ti | SUS316TI | 316TI | S31635 | - | 1.4571 | 04Crl7Nil2MoTi20 | 316Ti | 316TI |
14 | 00Crl7Nil4Mo2 | 022Crl7Nil2Mo2 | SUS316L | 316L | S31603 | STS316L | 1.4404 | ~02Crl7Nil2Mo2 | 316L | 316L |
15 | 0Crl7Nil2Mo2N | 06Crl7Nil2Mo2N | SUS316N | 316N | S31651 | STS316N | - | - | 316N | 316N |
16 | 00Crl7Nil3Mo2N | 022Crl7Nil3Mo2N | SUS316LN | 316LN | S31653 | STS316LN | 1.4429 | - | 316LN | 316LN |
17 | 0Crl8Nil2Mo2Cu2 | 06Crl8Nil2Mo2Cu2 | SUS316J1 | - | - | STS316J1 | - | - | 316J1 | 316J1 |
18 | 00Crl8Nil4Mo2Cu2 | 022Crl8Nil4Mo2Cu2 | SUS316J1L | - | - | STS316J1L | - | - | - | 316J1L |
19 | 0Crl9Nil3Mo3 | 06Crl9Nil3Mo3 | SUS317 | 317 | S31700 | STS317 | - | - | 317 | 317 |
20 | 00Crl9Nil3Mo3 | 022Crl9Nil3Mo3 | SUS317L | 317L | S31703 | STS317L | 1.4438 | - | 317L | 317L |
21 | 0Crl8Nil0Ti | 06Crl8NillTi | SUS321 | 321 | S32100 | STS321 | 1.4541 | 04Crl8Nil0Ti20 | 321 | 321 |
22 | 0Crl8NillNb | 06Crl8NillNb | SUS347 | 347 | S34700 | STS347 | 1.455 | 04Crl8Nil0Nb40 | 347 | 347 |
Austenitic-ferritic stainless steel (duplex stainless steel) | ||||||||||
23 | 0Cr26Ni5Mo2 | - | SUS329J1 | 329 | S32900 | STS329J1 | 1.4477 | - | 329J1 | 329J1 |
24 | 00Crl8Ni5Mo3Si2 | 022Crl9Ni5Mo3Si2N | SUS329J3L | - | S31803 | STS329J3L | 1.4462 | - | 329J3L | 329J3L |
0Crl8Nil0Ti ferritic stainless steel | ||||||||||
25 | 0Crl3AI | 06Crl3Al | SUS405 | 405 | S40500 | STS405 | 1.4002 | 04Crl3 | 405 | 405 |
26 | - | 022CrllTi | SUH409 | 409 | S40900 | STS409 | 1.4512 | - | 409L | 409L |
27 | 00Crl2 | 022Crl2 | SUS410L | - | - | STS410L | - | - | 410L | 410L |
28 | lCrl7 | 10Crl7 | SUS430 | 430 | S43000 | STS430 | 1.4016 | 05Crl7 | 430 | 430 |
29 | lCrl7Mo | 10Crl7Mo | SUS434 | 434 | S43400 | STS434 | 1.4113 | - | 434 | 434 |
30 | - | 022Crl8NbTi | - | - | S43940 | - | 1.4509 | - | 439 | 439 |
31 | 00Crl8Mo2 | 019Crl9Mo2NbTi | SUS444 | 444 | S44400 | STS444 | 1.4521 | - | 444 | 444 |
Martensitic stainless steel | ||||||||||
32 | lCrl2 | 12Crl2 | SUS403 | 403 | S40300 | STS403 | - | - | 403 | 403 |
33 | lCrl3 | 12Crl3 | SUS410 | 410 | S41000 | STS410 | 1.4006 | 12Crl3 | 410 | 410 |
34 | 2Crl3 | 20Crl3 | SUS420J1 | 420 | S42000 | STS420J1 | 1.4021 | 20Crl3 | 420 | 420J1 |
35 | 3Crl3 | 30Crl3 | SUS420J2 | - | - | STS420J2 | 1.4028 | 30 Crl3 | 420J2 | 420J2 |
36 | 7Crl7 | 68Crl7 | SUS440A | 440A | S44002 | STS440A | - | - | 440A | 440A |
Copyright © 2019 East King Steel (Guangdong) Co., Ltd. | Reservados todos los derechos
¡Estamos aquí para ayudarte! Si cierra el chatbox, automáticamente recibirá una respuesta nuestra por correo electrónico. Por favor, asegúrese de dejar sus datos de contacto para que podamos ayudarlo mejor.